FEATURES:
● 15W DIL PACKAGE
● 2:1 WIDE INPUT RANGE
● 100% BURNED IN
● HIGH EFFICIENCY
● UL94V-0 PACKAGE MATERIAL
● CUSTOM SOLUTIONS AVAILABLE
● RoHS COMPLIANT
● Remote Control:On/Off

APPLICATIONS: 
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment

Input:9-18V  , 18-36V ,  36-75V

Output:3.3V , 5V , 12 , 15 , ±12V , ±15V

Parameters  Conditions Min Typ Max Units
Voltage Types    2:1
12 Vin  9 / 8    VDC
24 Vin  17.0 / 16.5    VDC
Start-up voltage /
under voltage shut down
48 Vin  33.0 / 30.5      VDC
Filter  Pi Network      
Protection  Fuse Recommended      
 Parameters  Conditions Min Typ Max Units
Voltage Tolerance        ±2  %
Output voltage adj. range  only for single output models      ±10  %
single output      0.5  %  Line Regulation
(Vmin – Vmax)  dual output      0.5  %
single output      0.5  %  Load Regulation  
(25 %F.L– 100%F.L)  dual output models balanced load     1.0  %
Minimum load  required  0    10  %
Ripple and noise(20 MHz bandwidth)  with external capacitor see application note.      100  mVp-p
Output current limitation    at 150 % typ.of Iout max., constant current
Short circuit protection    automatic recovery
3.3VDC  3.7    5.4  Vout
5VDC  5.6    7.0  Vout
12VDC  13.5    19.6  Vout
Over voltage protection
15VDC  16.8    20.5  Vout
Start up time  nominal Vin and constant resistive load    450    ms
Transient response setting time  25% load step change    250    us
3.3 & 5 VDC    1000    uF
12 VDC    330    uF
15 VDC    220    uF
±12 VDC    ±150    uF
Max. capacitive load
±15 VDC    ±100    uF 
Parameters  Conditions Min Typ Max Units
Operating(with derating)  -40 +85  ℃ Case temperature  +100  ℃ Temperature ranges
Storage  -55 +125  ℃ Humidity  non condensing  5 95  %
Reliability, calculated MTBF  MIL-HDBK-217F, @ +25°C, ground benign  560000   Hours
Isolation voltage  For 60 seconds(Input/Output)  1500 VDC
Isolation capacity  Input/Output  1000   pF
Isolation resistance  Input/Output (500 VDC)  1000     MΩ
On  3.0 ... 12 VDC or open circuit
Off  0 ... 1.2 VDC or short circuit pin 6 and pin 2 Remote On/Off
Off idle current:  2.5   mA
Switching frequency (fixed)  pulse width modulation PWM  400  KHz
Case material    nickel coated copper
Baseplate    non conductive FR4
Potting material    epoxy (UL 94V-0 rated)

Weight    15 g (0.53 oz)
Soldering temperature    max. 265℃/ 10sec